11-03-2005, 07:50 AM
[li]Inspect and lubricate the wheel bearings. Remove the bearings, clean them and then check them for damage. Then, pack the bearings with marine grease and reassemble. [li]Check the tires, and inspect each for excessive or uneven wear and make sure there are no cracks or cuts in the sidewalls. In addition, be sure to check the air pressure on all of the tires, including the spare. [li]Inspect the frame and look for rust and cracks. If you find rusty areas, sand down the area with a wire brush or sandpaper, re-prime the bare spots and paint with several coats of spray paint. If you find cracks, check with your local dealer about proper repairs. [/li]
[signature]
[signature]