Fishing Forum

So I was thinking about replacing my toon single
transport wheel with big fat beefy double kayak
scupper wheels..................
Anybody done something like that before ?
Share please []




Peter
[signature]

I made this one with a couple of wheels from harbor freight and welded up the frame but the horizontal bars instead of the vertical "scupper" bars, aided by a strap to lash down your toon might be a better option. You might have to modify one but I've used mine in sand and pretty rough terrain with no issues. I believe these wheel dollys are for the sit in kayaks. Hope this helps
[signature]

Thank you for the pictures. You did a fine job !
Peter
[signature]

[quote peter805]So I was thinking about replacing my toon single
transport wheel with big fat beefy double kayak
scupper wheels..................
Anybody done something like that before ?
Share please []

[.img][url "http://a1672.g.akamai.net/7/1672/116/20110601/www.ritzcamera.com/graphics/products/m-17/MP131585117.jpg[/img]"]http://a1672.g.akamai.net/...P131585117.jpg[/img][/url]


Peter[/quote]


Weight, bulk, storage ease on board and ability to float are some considerations that are important to me with wheels. The lightest I used was hard 18" plastic wheels from a child's front big wheel trike on a straight telescoping axle with 2 PVC cradles for the toons, with lash down to each pontoon. Two of my pontoons had a cross bar behind, so I also had a different "flip" up design which used the cross bar and saved a lot of time and space when in use. No flats with the big wheels....

Pon
[signature]

what kind of "boat" do you have in that second picture...???

MacFly [cool]
[signature]

I could see assassins configuration with a small loading strap permanently attached to the frame.. set your toon on the wheels/rack... tighten down the strap and you are off to the races.. :-).. but not at Delmar.. LOL..

MacFly
[signature]

It's a Heritage "featherlight" kayak. Super flat on the bottom to provide a stable fishing platform as well as only being 38 lbs and 9.5 feet long still easy enough to tote around just not as easy as the tubes
[signature]

have you seen the freedom hawk 12 or 14??
[signature]

I never heard of them before, just got off their website and the outrigger system . looks very impressive.
[signature]

It should work fine depending on how you attach it to the toon. You might be able to do some kind of "flip up and lock" attachment or you could remove them and either tie them on to the pontoon rack or tote them back to your truck.

Flip up might be in the way of a motor if you use one.

You could use a pair of "butterfly pipe clamps on the back of your rack.
[signature]

Ordered the wheels, they are coming in.
My major problem with the single wheel is that I was
not able to put it on and off easy with the huge toon
rear deck. It is a major pain in the .......
Leaving the wheel in place is no good because of
the weed beds I like to go through to get to fish.
So, I was thinking to extend the toon frame in the back
somehow so the new wheels would be a LOT easier
to get to.
Also having two fat wheels is going to be nice on
sand and soft dirt.
The wheels do come off its frame real fast and the frame
comes a part as well fast so I can just store it in my
rear storage cooler (rear deck).
I will post here some pictures of the set up if someone
would be interested......
[signature]

Yes, post a picture when you get set up. Good luck. I am sure you will come up with something that works for you.
[signature]