Field Testing Hawaiian Custom Rods By Okuma! - Printable Version +- Fishing Forum (https://bigfishtackle.com/forum) +-- Forum: Saltwater Fishing Forum (https://bigfishtackle.com/forum/forumdisplay.php?fid=401) +--- Forum: Saltwater Fishing General (https://bigfishtackle.com/forum/forumdisplay.php?fid=3) +--- Thread: Field Testing Hawaiian Custom Rods By Okuma! (/showthread.php?tid=1051581) |
Field Testing Hawaiian Custom Rods By Okuma! - ScubaChris - 09-18-2018 Casting Okuma's Ulua & Menpachi Rods! It's important to develop faith in your equipment. To be positive that your choices in line strength, hooks, swivels, brands combined will result in a rig that'll be a part of who you are & how you fish. Took me awhile to put together new combos. Today i went to a familiar area to test how everything "meshes" together. Early morning there was no wind so i was drop shotting baits only 30-40yds out using 3oz banks on the Ulua "GT" rod rated MH at 7-10oz. No problem. When the winds picked-up i was throwing 6oz directly into the wind with good distances. So now i now if i used heavier weights that my distance will be good even casting into the wind. I forgot my wrist brace since i badly injured my wrist so casting was a "painful" joy. I also used new extended length sand spikes with beveled edges. Mustad Circle Hooks, ball bearing swivels, tried different lead weights & leader set-ups. I was very happy that everything was working well. The Tesoro 12S Star Drag has 65lb braid backing to monofilament top shot. Tried both MH & H 13' Ulua Rods & my other Tesoro Star Drag that had all 80lb Braid. I also used all 3 Menpachi Rods of 10'7", 12' & 13' with varying casting weights. It's good to know the limitations of your gear & when to use certain lengths & strengths for different applications. Now i can go to dangerous locations to night casting on my own again. Still nursing a very bad wrist but over my concussion. Now i'm familiar with my new rigs & hopefully will put them to the test. https://www.youtube.com/watch?v=bYnBiehceuQ [signature] |