+- Fishing Forum (https://bigfishtackle.com/forum)
+-- Forum: Utah Fishing Forum (https://bigfishtackle.com/forum/forumdisplay.php?fid=386)
+--- Forum: Boats & Motors (https://bigfishtackle.com/forum/forumdisplay.php?fid=171)
+--- Thread: Johnson 25 ? (/showthread.php?tid=780144)
Johnson 25 ? - castnshoot - 11-11-2012
I have a Johnson 25 hp that I am having problems with.
It ran great at it's last location at 300' above to 150' below sea level.
I now have it at a lake in southern Utah @ 5600" above sea level, and it runs like crap.
I'm hoping it is just a matter of changing the jet size.
Does any body know of a reliable person that could take care of that or maybe rebuild the carb. if it needs it?
I'm near Beaver Utah.
[signature]
Re: [castnshoot] Johnson 25 ? - GEEZER - 11-12-2012
What year is the engine? I'm thinking it will have mixture adjustment needle valves for both high & low speed operation.
[signature]
Re: [castnshoot] Johnson 25 ? - BearLakeFishGuy - 11-14-2012
I brought a Johnson 35 out to Utah from Michigan. All I had to do was adjust the one carb mixture knob (lean-rich) on the front of the cowling. I had to turn it all the way to one side. Then I removed the small screw in the front of the knob, took off the knob and pointed it in the other direction, then replaced the knob and screw. Then I re-adjusted the carb again.
The knob would not turn enough in one direction so I had to remove that screw so I could continue to turn the adjuster. It worked and I never had to rejet the carb. I sold the boat to a friend and he is still using the motor. Its been over 10 years now and the motor still runs great.
[signature]