Modifying A Do It Molds Essential Series Mold To Make The Bait Come Out Shiny - Printable Version +- Fishing Forum (https://bigfishtackle.com/forum) +-- Forum: Misc. Fishing Forums (https://bigfishtackle.com/forum/forumdisplay.php?fid=335) +--- Forum: Lure & Jig Making (https://bigfishtackle.com/forum/forumdisplay.php?fid=128) +--- Thread: Modifying A Do It Molds Essential Series Mold To Make The Bait Come Out Shiny (/showthread.php?tid=956234) |
Modifying A Do It Molds Essential Series Mold To Make The Bait Come Out Shiny - skimpy - 12-12-2015 The Do-It Molds Essential Series Molds are awesome molds. They are made with sand cast aluminum rather than machined aluminum. This brings the price down a lot but the downside is that the baits come out with a dull/matte finish. Most anglers want the bait to come out shiny like they would with a machined aluminum mold. Here is a way to get shiny baits with a Do-It Molds Essential Series Mold. Hope this helps somebody !!! Thanks for watching, please subscribe [url "https://youtu.be/f3IZmISLEjY"]https://youtu.be/f3IZmISLEjY[/url] [signature] Re: [skimpy] Modifying A Do It Molds Essential Series Mold To Make The Bait Come Out Shiny - SenkoSam - 04-10-2016 Thanks for the info. I've been wondering if the engine paint might work for plaster molds for the same reason - shinny lures. I use a polyurethane coat and after cured use mineral oil for each pour. The oil would also work in a metal mold as long as the coat was brushed on thin. My baits come out shiny every time with no defects - even the full round hand injection plaster molds. [signature] Re: [skimpy] Modifying A Do It Molds Essential Series Mold To Make The Bait Come Out Shiny - Uncle_Arnie - 03-22-2018 [quote skimpy]The Do-It Molds Essential Series Molds are awesome molds. They are made with sand cast aluminum rather than machined aluminum. This brings the price down a lot but the downside is that the baits come out with a dull/matte finish. Most anglers want the bait to come out shiny like they would with a machined aluminum mold. Here is a way to get shiny baits with a Do-It Molds Essential Series Mold. Hope this helps somebody !!! Thanks for watching, please subscribe [url "https://youtu.be/f3IZmISLEjY"]https://youtu.be/f3IZmISLEjY[/url][/quote] When I 3d print molds with an FDM machine instead of SLA, I run into the same problem. I dont know how detailed the mold you are using is, but I circumvent the problem by coating the mold with 2 part epoxy. alternatively if there aren't any difficult geometries you could try polishing it yourself. EDIT: links are not allowed for advertisement unless you pay for that right. |