02-07-2004, 09:34 PM
basicly it's a large chisel . you chip at the ice to make a hole .
a sturdy rod 3/4 " x 5 to six feet long , and weld a 1/2"x 2"x 4" piece of steel on it's tip with a 45 degree edge on the tip .
[signature]
a sturdy rod 3/4 " x 5 to six feet long , and weld a 1/2"x 2"x 4" piece of steel on it's tip with a 45 degree edge on the tip .
[signature]