Best store for boat prop advice?

[JSTLRKNG]

You need to reduce pitch not diameter, Bear lake is close to 6000 ft willard is 4200 ish for every 1000 ft you would drop 1 inch in pitch so you would want to go with a 15 1/2 by 11 assuming you are already set up correctly.

https://www.boatpropellerwarehouse.com/p...ler-767620

Thanks for the info Bassin_Blitz, I was hoping someone would know which one(pitch vs dis) was the correct way to go. I was thinking a smaller dia prop would turn faster and give me higher RPM. That info will help me decided what I need.

Bassin_Blitz is exactly right, but get it ported when you buy it if you want to fish high altitude lakes. Yellowstone is at 8K. You probably wouldn't get on plane without it being ported, could be wrong. Remember, you lose 3% of your horsepower on a naturally aspirated motor for every 1K increase in elevation. Hard to spin up to the power band without the cavitation you get when ported.

WWW.PTPROP.COM makes a nice stainless with very little slip.

j