Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Making "Smile Blades"
#14
(03-26-2020, 01:59 AM)liketrolling Wrote: Pat  every one of your custom bait floats will work for kokanee.   but pink is the number one color but you need some green when they start going deep.   about 4 years ago at flaming gorge we were catching a lot of kokanee.  a guide was fishing by us.  we came in the same time he did, and he ask me what I was using because no one else out there was catching any thing.  I showed him how I had my squids setup with floats ( not as good looking as yours) they use for [font]Walleye, he asked what thay did to the squid, I said I don't know but it is something they have never seen befor.  on some of my dodgers I will use 1/2 light green almost yellow and the other half pink. dark green does not work for me.   and I love those  colors togather.   I also make a dodger the first coat is light blue glow and a top coat that is glow pink when it is charged the blue comes through the pink and that works.[/font]
As you know, I have already been experimenting with a few other things...in the hot colors the kokes like.  I look forward to working with you to develop a line of things that work well and aren't readily available on the market.
Reply


Messages In This Thread
Making "Smile Blades" - by TubeDude - 03-25-2020, 04:16 PM
RE: Making "Smile Blades" - by Therapist - 03-25-2020, 04:41 PM
RE: Making "Smile Blades" - by TubeDude - 03-25-2020, 05:50 PM
RE: Making "Smile Blades" - by lee! - 03-25-2020, 05:51 PM
RE: Making "Smile Blades" - by fast_randy - 03-25-2020, 06:13 PM
RE: Making "Smile Blades" - by MSM1970 - 03-25-2020, 06:18 PM
RE: Making "Smile Blades" - by TubeDude - 03-25-2020, 06:53 PM
RE: Making "Smile Blades" - by liketrolling - 03-25-2020, 07:31 PM
RE: Making "Smile Blades" - by TubeDude - 03-25-2020, 08:37 PM
RE: Making "Smile Blades" - by lifeshort - 03-25-2020, 07:56 PM
RE: Making "Smile Blades" - by 2knots - 03-25-2020, 10:55 PM
RE: Making "Smile Blades" - by wiperhunter2 - 03-26-2020, 01:53 AM
RE: Making "Smile Blades" - by liketrolling - 03-26-2020, 01:59 AM
RE: Making "Smile Blades" - by TubeDude - 03-26-2020, 04:09 AM
RE: Making "Smile Blades" - by elkantlers - 03-30-2020, 04:12 AM
RE: Making "Smile Blades" - by TubeDude - 03-30-2020, 11:17 AM
RE: Making "Smile Blades" - by fish_4_all - 05-27-2024, 01:36 AM
RE: Making "Smile Blades" - by TubeDude - 05-27-2024, 11:58 AM
RE: Making "Smile Blades" - by wiperhunter2 - 05-27-2024, 04:11 PM
RE: Making "Smile Blades" - by TubeDude - 05-27-2024, 04:20 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)