I made some triggers out of coat hanger wire that worked pretty good for “homemade jaw jackers”
Takes a little bending here and there to adjust them, make sure to smooth the ends so it doesn’t damage guides. I fixed some in place on rod holders, but that limits them to a specific rod or length of rod that needs to match the set up. I ended up making some on “leashes” of heavier cord so I could adjust the length I needed based on the rod I was using in a holder. Pretty easy to do once you get the hang of it.
I’ll try to attach some pics.
![[Image: 24-DDD5-B8-464-B-4-CA7-B0-F3-9-DDF7-C1-DCDEC.jpg]](https://i.postimg.cc/14K3pKft/24-DDD5-B8-464-B-4-CA7-B0-F3-9-DDF7-C1-DCDEC.jpg)
![[Image: A09-D47-A2-2111-4-FF2-A669-D03-EDFF433-DB.png]](https://i.postimg.cc/ykQ6GYhC/A09-D47-A2-2111-4-FF2-A669-D03-EDFF433-DB.png)
Takes a little bending here and there to adjust them, make sure to smooth the ends so it doesn’t damage guides. I fixed some in place on rod holders, but that limits them to a specific rod or length of rod that needs to match the set up. I ended up making some on “leashes” of heavier cord so I could adjust the length I needed based on the rod I was using in a holder. Pretty easy to do once you get the hang of it.
I’ll try to attach some pics.
time spent fishing isn't deducted from ones life