10-18-2023, 05:57 PM
Hi Jeff , hey another note to consider if you get another axle. I had been using the Buddy bearings for a little while at first I thought it was the way to go . I always check my hubs for heat and slung grease on the wheels , and I would find that the Buddy Bearing Caps were missing . After that happened twice , I had enough of that nonsense of cleaning everything up and replacing the bearings because the Backside of the bearings were not getting the grease. So I decided to replace my axle with one that has the EZ - Lube Spindles with the Grease fitting in the end of the Spindle, The way this works is that when you grease your bearings on this axle , the grease goes through the spindle to the backside of the bearing and then works forward. This way the backside of the bearing gets the grease first , if you look up the EZ-Lube Axles online there is a video of just how this system works. I was convinced.