How to rig fishfinder

[arrowheadsaver]

Here is a picture of mine. I can get it ready in about 40 seconds. I just rigged the bracket for the moniter on a ram mount, (this way, you can move it in any direction) then put the wires inside on the bottom, put down some foam over the wires (make sure the wires are coming out the side the bracket is on) then put the moniter on the foam along with an alarm battery so the bouncing around don't ruin them, and when I am ready to go, just attatch to the bracket, plug in the wires and turn it on. The transducer is on the oppisit side of the moniter and I just used pvc pipe and put the transducer on that. Then I cut the same diamater pvc pife horrazontaly so the transducer pipe will fit inside to clamp it on. (If that makes sense.) Make it about 2-3 inches smaller than the box it is on. I mounted another cut pvc pipe on one side to transport the transducer with. Give me an email, and I can take more pics and show them to you.

Bart
[signature]