05-28-2005, 12:37 AM
[cool][#0000ff]The tool rack idea works great. It was just too low and I had to look over the side of the pocket to see the tools. [/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]So, I split a 8" piece of 1/2" PVC with a jigsaw, and screwed one half to each side facing down. I spaced them at 13" on center, which makes them fit into the D rings on the side of the SFC perfectly. They slide down into the D rings, snug up tight, and put the rack up where I can see the tools.[/#0000ff]
![[Image: gforum.cgi?do=post_attachment;postatt_id=10360;]](http://www.bigfishtackle.com/cgi-bin/gforum/gforum.cgi?do=post_attachment;postatt_id=10360;)
[#0000ff][/#0000ff]
[#0000ff]Only problem now is that the lip gripper is too high and I bump my arm on it. [/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]I'll keep working on it.[/#0000ff]
[signature]
[#0000ff][/#0000ff]
[#0000ff]So, I split a 8" piece of 1/2" PVC with a jigsaw, and screwed one half to each side facing down. I spaced them at 13" on center, which makes them fit into the D rings on the side of the SFC perfectly. They slide down into the D rings, snug up tight, and put the rack up where I can see the tools.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]Only problem now is that the lip gripper is too high and I bump my arm on it. [/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]I'll keep working on it.[/#0000ff]
[signature]