09-15-2005, 02:27 PM
make sure that you use the nail that are supplies for axles. Some kits have a solid axle and I found out the hard way that they are not as fast as the nail axle.
Also keep the weight to the back and low if possible and also get right on the 5 oz mark.
I have heard of people using a small hollow copper rod that they insert in the axle tracks then insert the nail inside that, It needs to be very small so that the nail is tight.
Good Luck
[signature]
Also keep the weight to the back and low if possible and also get right on the 5 oz mark.
I have heard of people using a small hollow copper rod that they insert in the axle tracks then insert the nail inside that, It needs to be very small so that the nail is tight.
Good Luck
[signature]