03-31-2003, 11:17 PM
there is a small filter on the side of the engine you can change. also you should try to clean out the fuel tanks. sometimes you'll get a piece of debris floating around in there and it will get sucked up in the fuel line and cause a blockage and as soon as the motor dies it settles down the line to the tank or you bulb until the next time it gets knocked loose.
Remember that your mixing chamber in your carberators have only 1/1000" for fuel to flow through and get atomized so any tarnish or buildup will block them. there are usually 4 holes per venturi for fuel to pass through so if you block 2 of them there goes half your performance.
I happen know this good looking bald guy that could help fix your problem, let me know.
Congrats on the new BFT member D
[signature]
Remember that your mixing chamber in your carberators have only 1/1000" for fuel to flow through and get atomized so any tarnish or buildup will block them. there are usually 4 holes per venturi for fuel to pass through so if you block 2 of them there goes half your performance.
I happen know this good looking bald guy that could help fix your problem, let me know.
Congrats on the new BFT member D
[signature]