10-08-2007, 10:31 PM
[black][size 3]You have a good handle on the use of lead wire. It comes in various dia. I have never heard of tungsten wire, but it may exist. [/size][/black]
[size 3][/size]
[size 3]You have been talking about using a plastic bead behind a cone head, I prefer to use a few wraps of lead wire. It will hold the cone/bead head in place and solid. After I butt the lead up behind the head, I wrap it with thread, and it seems to hold everything in place.[/size]
[size 3][/size]
[size 3]I've never used the addition of epoxy or head cement for securing things in place, but it sounds like a good idea if there is any question about it moving.[/size]
[size 3][/size]
[signature]
[size 3][/size]
[size 3]You have been talking about using a plastic bead behind a cone head, I prefer to use a few wraps of lead wire. It will hold the cone/bead head in place and solid. After I butt the lead up behind the head, I wrap it with thread, and it seems to hold everything in place.[/size]
[size 3][/size]
[size 3]I've never used the addition of epoxy or head cement for securing things in place, but it sounds like a good idea if there is any question about it moving.[/size]
[size 3][/size]
[signature]