07-15-2008, 03:44 AM
Have you checked the valve? If you don't screw it in snug it'll leak air. Try putting a smudge of chapstick or something on the sealing surface (just a very thin film) to lube the sliding contact when you snug it down.
You can also take the bladder out, put a very light pressure on it, and spray it down with soap water solution and look for the foam.
You're an awfully nice guy to be thinking of your big guy friends like this!
Also, it's not clear whether the Fat Cat has a urethane bladder any more.
_SHig
[signature]
You can also take the bladder out, put a very light pressure on it, and spray it down with soap water solution and look for the foam.
You're an awfully nice guy to be thinking of your big guy friends like this!
Also, it's not clear whether the Fat Cat has a urethane bladder any more.
_SHig
[signature]