03-20-2009, 12:40 PM
[cool][#0000ff]I have been tinkering with different "tube carts" over the years. One of the designs I recently made from a couple of cheap pneumatic tires from Harbor Freight would work well for a toon, if you made it sturdy enough.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]The design relies on a simple supportive frame of PVC or stronger material, to support both sides and to provide an axle for the wheels. I inserted 1/2" bar stock through the PVC for the wheels to turn on. You can drill and cotter pin the ends of the bar stock to secure the axle.[/#0000ff]
[#0000ff][/#0000ff]
[inline "PNEUMATIC FRONT.jpg"]
[inline "PNEUMATIC TIRES.jpg"]
[signature]
[#0000ff][/#0000ff]
[#0000ff]The design relies on a simple supportive frame of PVC or stronger material, to support both sides and to provide an axle for the wheels. I inserted 1/2" bar stock through the PVC for the wheels to turn on. You can drill and cotter pin the ends of the bar stock to secure the axle.[/#0000ff]
[#0000ff][/#0000ff]
[inline "PNEUMATIC FRONT.jpg"]
[inline "PNEUMATIC TIRES.jpg"]
[signature]