07-12-2010, 12:47 AM
[cool][#0000ff]Aquaseal is probably your best bet...for a hole next to a seam. Tough to get a patch or tape to smooth down enough for a good seal. FC4s have the vinyl bladders and they are not as tough as urethane. More prone to splitting from pressure. No need to replace it unless an Aquaseal patch will not fix it.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]Not sure of the specs on the foam. Check with the FloatTubeStore or Outcast for replacement info. Then if you can find suitable material you can cut and fit your own. Styrofoam won't get it.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]No problem with replacing an inflated seat with a foam one. Just have to have the right material of the right size.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]Good luck.[/#0000ff]
[signature]
[#0000ff][/#0000ff]
[#0000ff]Not sure of the specs on the foam. Check with the FloatTubeStore or Outcast for replacement info. Then if you can find suitable material you can cut and fit your own. Styrofoam won't get it.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]No problem with replacing an inflated seat with a foam one. Just have to have the right material of the right size.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]Good luck.[/#0000ff]
[signature]