08-02-2012, 08:05 PM
While I was getting my bracket made up for my tube I just used a piece of 1/8" inch rope to lash my finder to the side of my tube.
I tied the rope to the top of the post then wraped it around the tube and down around the bottom part of the post in the same way that you tie off the anchor rope to the cleat on a boat.
It might be a little redneck but it works until you can get your final set up put together.
[signature]
I tied the rope to the top of the post then wraped it around the tube and down around the bottom part of the post in the same way that you tie off the anchor rope to the cleat on a boat.
It might be a little redneck but it works until you can get your final set up put together.
[signature]
Live to hunt----- Hunt to live.