08-17-2013, 03:21 PM
For tubes, pontoons, and kayaks, a 1.5# anchor should be plenty. I use a piece of scrap steel welded into a "T" shape. I noticed that they have the folding ones now at Smith and Edwards for about six bucks.
To avoid loss due to snagging, tie the anchor rope to the bottom end of the anchor and then use a small zip-tie to hold it to the top ring. If you get snagged, a sharp tug breaks the zip tie and then the anchor backs itself out of the snag.
[signature]
To avoid loss due to snagging, tie the anchor rope to the bottom end of the anchor and then use a small zip-tie to hold it to the top ring. If you get snagged, a sharp tug breaks the zip tie and then the anchor backs itself out of the snag.
[signature]