01-02-2014, 10:50 PM
A cheap try would be a dog chain collar , tie a rope in a y fashion, run a cloths hanger wire through the center knot and tie onto each end of the dog chain collar (so as to hold it in a open loop) if you can get the chain around the auger, pulling on slowly, the weight of the auger should make the wire collapse and fold the chain around the auger.
Another option would be a couple of pieces of sprinkler pipe glued together with an electrician fish tape ran through the center. fold the end around the pipe and duct tape it to the pipe. You should be able to push the fish tape through the pipe to male a expanding loop which you can pull tight if you can get it around the auger. (sprinkler pipe is cheap, and fish tape can be rented)
Of coarse you will need a camera so you can see what your doing. Good Luck
[signature]
Another option would be a couple of pieces of sprinkler pipe glued together with an electrician fish tape ran through the center. fold the end around the pipe and duct tape it to the pipe. You should be able to push the fish tape through the pipe to male a expanding loop which you can pull tight if you can get it around the auger. (sprinkler pipe is cheap, and fish tape can be rented)
Of coarse you will need a camera so you can see what your doing. Good Luck
[signature]