02-07-2014, 02:53 AM
well, ive been wanting to build a custom rifle for quite awhile and after this past season with a couple kills, I decided it was time. i'll call it a "semi-custom" since I used a stock 700 stainless action. lol! had the action blue printed/trued as well as truing the bolt face and lapping the lugs. went with a hart stainless match grade barrel (270). I couldn't decide between a 24" or 26" so I had it cut at 25" lol! I had it turned to a remington sendero bull barrel contour and shaved .050" off to reduce some weight. put a timney straight trigger in it. used an hs precision stock with a full aluminum bedding block but also had the action and recoil lug glass bedded in case of any imperfections with the aluminum block. also had a sims limb saver custom fitted to the stock. finished up by having a matte cerakote finish applied to the action and bolt. just got it back a few days ago. cant wait to break it in and tune some loads. hopefully i'll draw my bear tag and get it put to use early!!
[signature]
[signature]