02-22-2014, 02:23 AM
If you go with the Sta-bond be sure to get UK148 two part. It is pricey and only shelf life for a year.
OR, you can go with Loc-Tite
[url "http://www.loctiteproducts.com/p/cntct_vnylpl/overview/Loctite-Vinyl,-Fabric-&-Plastic-Flexible-Adhesive.htm"]http://www.loctiteproducts.com/p/cntct_vnylpl/overview/Loctite-Vinyl,-Fabric-&-Plastic-Flexible-Adhesive.htm[/url]
Easy and a lot less expensive.
Deflate the boat, place the mount where you want it and outline it with masking tape. This will allow you to get to the edges without making a mess.
Scuff both the mount and the toon with sandpaper. Wipe with MEK to make sure all oil is off. Apply the glue to both surfaces and let tack up before putting it on.
I made a wood frame just big enough to outline the middle mount then put a battery on top and let it sit overnight.
That was two years ago on this boat.
![[Image: 022.jpg]](http://i44.photobucket.com/albums/f17/FlyGoddess/Renegade/022.jpg)
[signature]
OR, you can go with Loc-Tite
[url "http://www.loctiteproducts.com/p/cntct_vnylpl/overview/Loctite-Vinyl,-Fabric-&-Plastic-Flexible-Adhesive.htm"]http://www.loctiteproducts.com/p/cntct_vnylpl/overview/Loctite-Vinyl,-Fabric-&-Plastic-Flexible-Adhesive.htm[/url]
Easy and a lot less expensive.
Deflate the boat, place the mount where you want it and outline it with masking tape. This will allow you to get to the edges without making a mess.
Scuff both the mount and the toon with sandpaper. Wipe with MEK to make sure all oil is off. Apply the glue to both surfaces and let tack up before putting it on.
I made a wood frame just big enough to outline the middle mount then put a battery on top and let it sit overnight.
That was two years ago on this boat.
[signature]