06-08-2015, 02:34 AM
I glued some extra D rings and those exact same Scotty rod mounts to my toon its fairly easy, but you'll want to research what works best for the material your toon is made out of. I think the Outcasts are Vinyl but I could be wrong.
Slightly sand the location you want the rod holder
Use a chemical cleaner that works best for your toon in a pinch use alcohol I used Mek(Methyl Ethyl Ketone) but again research what works best for the material your toon.
Then get a adhesive I used Vyna bond adhesive, Vyna bond should work on Vinyl.
Head over the the NRS web site they have a bunch of instructional videos on how to glue rod mounts extra D rings ect ect
http://www.nrs.com/learn/install-d-rings...otcups.asp
http://www.nrs.com/learn/?group=1&category=8
[signature]
Slightly sand the location you want the rod holder
Use a chemical cleaner that works best for your toon in a pinch use alcohol I used Mek(Methyl Ethyl Ketone) but again research what works best for the material your toon.
Then get a adhesive I used Vyna bond adhesive, Vyna bond should work on Vinyl.
Head over the the NRS web site they have a bunch of instructional videos on how to glue rod mounts extra D rings ect ect
http://www.nrs.com/learn/install-d-rings...otcups.asp
http://www.nrs.com/learn/?group=1&category=8
[signature]