Fishing Forum › Utah Fishing Forum › Boats & Motors v
Boat Trailer Axle Replaced

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
Boat Trailer Axle Replaced
AFDan52 Offline
Chain Pickeral
********
Posts: 2,359
Threads: 33
Joined: Sep 2002
Reputation: 1
#1
08-18-2021, 04:57 AM
Hi all , I finally got tired of messing with the Bearing Buddies on my Boat trailer Hubs. I've been looking around for a new Boat trailer Axle for a while  and finally found one . I found it at Bubba's Trailers on 12th Street in Ogden. The axle I wanted has the EZ Lube Spindles , much easier to deal with than the Buddy bearing caps coming off and slinging grease all over everything.  I'm into it about $ 260.00 for a 3500lb axle . The axle was $ 200.00 plus they charged me $ 50.00 to move the Spring Mounts to my measurements . Anyway I'm happy with it.
Find
Reply
lifeshort Offline
WeakFish
****
Posts: 173
Threads: 11
Joined: May 2017
Reputation: 2
#2
08-18-2021, 06:52 PM
(08-18-2021, 04:57 AM)AFDan52 Wrote: Hi all , I finally got tired of messing with the Bearing Buddies on my Boat trailer Hubs. I've been looking around for a new Boat trailer Axle for a while  and finally found one . I found it at Bubba's Trailers on 12th Street in Ogden. The axle I wanted has the EZ Lube Spindles , much easier to deal with than the Buddy bearing caps coming off and slinging grease all over everything.  I'm into it about $ 260.00 for a 3500lb axle . The axle was $ 200.00 plus they charged me $ 50.00 to move the Spring Mounts to my measurements . Anyway I'm happy with it.

Sweet. I had a bearing go out on one of my ex boats and It chewed up the spindle. Was cheaper to replace with new axle than have a new spindle welded on.
Find
Reply
AFDan52 Offline
Chain Pickeral
********
Posts: 2,359
Threads: 33
Joined: Sep 2002
Reputation: 1
#3
08-18-2021, 07:00 PM
(08-18-2021, 06:52 PM)lifeshort Wrote:
(08-18-2021, 04:57 AM)AFDan52 Wrote: Hi all , I finally got tired of messing with the Bearing Buddies on my Boat trailer Hubs. I've been looking around for a new Boat trailer Axle for a while  and finally found one . I found it at Bubba's Trailers on 12th Street in Ogden. The axle I wanted has the EZ Lube Spindles , much easier to deal with than the Buddy bearing caps coming off and slinging grease all over everything.  I'm into it about $ 260.00 for a 3500lb axle . The axle was $ 200.00 plus they charged me $ 50.00 to move the Spring Mounts to my measurements . Anyway I'm happy with it.

Sweet. I had a bearing go out on one of my ex boats and It chewed up the spindle. Was cheaper to replace with new axle than have a new spindle welded on.

That's exactly what I' m looking to avoid , so I'm going to have an axle to sell . it's still in great condition , just not what I want.
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)