Posts: 1,159
Threads: 167
Joined: Sep 2014
Reputation:
19
My trim tilt has started leaking on my Yamaha F150 outboard. There are a number of kits out there that includes all of the seals to rebuild the 3 cylinders on the trim tilt unit with the tool to remove the cylinder caps for around $80. Just wondering if any of you folks have done the rebuild and might have a few tips or what would it cost to have a shop do it?
Posts: 1,300
Threads: 146
Joined: Jan 2009
Reputation:
9
About 2yrs ago I had to replace the plunger seals on my F150 as one starting leaking. Its not a hard job but its also best to get it fixed asap since that unit is submerged. The pump & motor assy still works fine. The best thing to do is stay with the correct Yamaha specific spanner tool for removal of caps.
Harrisville UT
2000 7.3L F250 Superduty '07 Columbia 2018 Fisherman XL Raymarine Element 9HV 4 Electric Walker Downriggers Uniden Solara VHF