I know its early but, Ice rod holder help

[fishing4thehog]

I found a ice rod hold on line last season but for the life of me i cant find it this yr.. I have a photo attached. Dose anyone know where this type is sold.. My wife cleaned up my computer and deleted dozens of web sites.. Im lost.
Thanks
[signature]

[adam19]

http://www.expeditionoutdoors.com/free-s...er-system/
[signature]

[fishing4thehog]

Thank you.
[signature]

[dubob]

[font "Comic Sans MS"][#800000][size 3]Oh crap! Thanks - now I've got to buy more stuff! [/size][/#800000][/font][]
[signature]

[RockyRaab]

With the new rules, I now need TWO of 'em...!
[signature]

[fishing4thehog]

I just bought 4 of them. Can't wait till ice on !
[signature]

[BRL1]

I picked up a couple of those at Cabela's a year ago, $10 each.

They work all right but still looking for something that I won't loose a rod out of.
[signature]

[brookieguy1]

ICE FISHING SUCKS!
[signature]

[TubeDude]

[#0000FF]If you can work with PVC you can make a tripod with a "quick draw" holder. The end of the rod slips down in the specially cut holder and the harder a fish pulls the tighter the rod holds.
[url "http://www.bigfishtackle.com/cgi-bin/gforum/gforum.cgi?post=716657;forum_view=forum_view_collapsed;page=unread#unread"]
PREVIOUS POST WITH PICS[/url]

I have made several variations of the tripod arrangement. Most work well. You can make the legs as long or short as you want...and vary the angles however you want. The key is the rod holder fitting. Here is a pic showing the "horizontal hold" with the rod tip directly above the hole. You will notice I use longer rods than most ice anglers. With this setup the long rod acts as a sensitive spring bobber and light bites are easy to see.

[inline "HOLDER SPINNING.jpg"]
[/#0000FF]
[signature]

[fishing4thehog]

I made my own in the past out of wood. They worked great holding the pole but I kept
Losing poles down the hole. Frustrating to say the least. I also need it to fold up for easy packing. Do you make yours glued together or easy to disassemble ? I also use longer rods.
[signature]

[TubeDude]

[#0000ff]One of the pics in the original post shows it broken down into pieces for packing and transport. I screw or glue the main connections but all of the different lengths of PVC tube just pop in and out for set up or take down.

By the way, I know a couple of guys who have made "hybrid" models...using a 1/2" PVC shaft and the quick draw holder, but sticking the shaft down inside a hole drilled in a piece of wood or other material.

[/#0000ff]
[url "http://www.bigfishtackle.com/cgi-bin/gforum/gforum.cgi?do=post_attachment;postatt_id=81465"]SLED READY.jpg[/url] (240 KB)
[signature]