Canopy design setup

[BURLEY]

This is the old 20x32 redwood deck that I resurfaced. Lots of screws removed, lots broken or stripped. Notice the latice top panels that I disassembled and used later for the shelves.

After 15 years, the whole framework had to be re-leveled and straightened.



 


Starting to lay down the 20' Trex boards.
[/url]
 
Held down using  and groove. No screws show on finished floor! Trex suggest 16" spacing.












[url=https://ibb.co/QbZZ5Rn]



Now it's ready for the awning. Trex gets extremely hot in the sun. Almost 50 measured degrees hotter than wood. Uncomfortable to walk on during sunny days.
And yes, I installed it myself.

---