Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Chamberlain Downrigger Releases
#3
(04-12-2022, 11:31 PM)Therapist Wrote: He has taken Black's release and modified it a bit.  Black's has been the best one out there for years.  You can adjust these to handle 4-6 lb line w/o breaking it. 

https://www.amazon.com/BLACK-MARINE-PROD...B07C271M6C

Will have to try Chamberlin's to see which is better.  !!

A few things IMO that make Chamberlains better than the Blacks.  The release tension and the up tension from the rod are independently adjustable on the Chamberlain.  Very handy as you can really load the rods yet still have a very light release.  The release tension is determined by the magnet gap which is fully adjustable.  Also as far as I know Blacks does not make a stacker release.  Like I said in the original comment the stackers are designed to run on 150 lb cable, although I have heard of cases where Kieth has personally adjusted stackers to run on braid for people.  The stackers are unlike anything else out there as they release and slide to the ball when they hit the pulley on the way up.  You kind of have to use them to see, it's kind of sketchy the first few times, it seems like they would fall off but I have been using the same set for a number of years, never lost one.  Superslick, having used them I don't want to stack with anything else.
Reply


Messages In This Thread
Chamberlain Downrigger Releases - by wall3y3 - 04-12-2022, 09:48 PM
RE: Chamberlain Downrigger Releases - by wall3y3 - 04-13-2022, 01:09 AM
RE: Chamberlain Downrigger Releases - by MACMAN - 04-13-2022, 01:56 AM
RE: Chamberlain Downrigger Releases - by dubob - 04-13-2022, 01:46 PM
RE: Chamberlain Downrigger Releases - by wall3y3 - 04-13-2022, 03:18 PM
RE: Chamberlain Downrigger Releases - by dubob - 04-14-2022, 02:18 PM
RE: Chamberlain Downrigger Releases - by Bduck - 04-14-2022, 03:46 PM
RE: Chamberlain Downrigger Releases - by wall3y3 - 04-14-2022, 07:21 PM
RE: Chamberlain Downrigger Releases - by Bduck - 04-15-2022, 12:15 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)