Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How did the flyrod get start?
#1
Who thought of it and how did it come to become that?
[signature]
Reply
#2
This come out of the old west. (short version)

one day while out cattle rustlin, Colammity Jane was trying to make a haisty retrete wile driving freshly russled long horned moo's over a mountain river pass.

Cracking her wip just inches over top the waters her cracks ecoed like thunder when all of a sudden a 10 pound golden trout leaped three feet out of the water to latch on to the fregh at the end of her whip, not having time to deal with the trout she placed the handle of her whip in to the rifle sling with her winchester. drawing her pistol to continue the drive of her punches.

Mean while that trout was not about to let go of the cow bloodied treated tussle on the end of her whip and when she came out of the river on the other side Calammity Jane noticed the golden trout was still latched on. she drew up the trout and whipped out her Bowie knife gutted him on the spot and headed for the hole in the wall...

the other rustlers there saw the fine fish she was about to throw on the camp fire and asked her where she came up with the vittle, and she said theirs gold fish in thim thar hills,

Well the next thing ya know the mad gold rush of 49 was started, for some cow poke who must have been standing to close to the cannons at the alimo and didnt quite hear all that had she said stated and slipped loose the wrong story.

So it was from there what begun a slow start that fly fishing got its begginings... and wouldnt ya know it she also started the method of trolling for fish at the same time...[angelic]
[signature]
Reply
#3
And here I thought it was an English thing[Wink]
[signature]
Reply
#4
sure sounded good,

I think he realy wants a real answer [cool]

My guess it would have come from the cane pole and was the next evilution to the modern spin and bait cast rod and reels.

I am sure a number of people came up with eyes and extra line, it may have nothing more than a couple pegs simmilar to that of our first ice fishing rods...

as to who got credit is beyond me...

I dont think any one realy thinks Calamity Jane realy pulled one in on the crack of a whip, but ya know how them tall tails go...[angelic]
[signature]
Reply
#5
[font "Poor Richard"][#008000][size 3]The earliest reported information about fly fishing goes back to around 200AD in a part of the world that I can neither spell or pronounce. However, here is some info on the fly rod.[/size][/#008000][/font]
[font "Poor Richard"][size 3][#008000]There were few startling breakthroughs in the fishing world of the eighteenth century, which was a time of consolidation and incremental change. The rod is a case in point. Early seventeenth century rods lacked running rings, although they sometimes had tip rings. Running rings first appeared on rods towards the end of the seventeenth century. The invention gave anglers much more control over the line while a fish was being played, but it didn't have much effect on casting distances, since the nature of the lines in use at the time precluded much more than a minimal "shoot". Early rings were extremely unreliable, and had a strong tendency to pull out of the rod when under pressure, which no doubt contributed to their slow uptake.[/#008000][/size][/font]
[font "Poor Richard"][size 3][#008000]By the latter half of the eighteenth century, an increasing differentiation between types[/#008000][/size][/font]
[font "Poor Richard"][size 3][#008000]of rods was evident and there was increasing sophistication in the choice of materials for the sections. Jointed rods were becoming more common, although the joints (often made of wood, sometimes reinforced with brass,) were horribly unreliable. Trout fly rods were still much longer than we are used to: as much as fourteen to seventeen feet, but the majority were shorter. Typical rods might measure twelve foot long for fishing with lines that terminated in two hairs or more; nine feet for fishing single hairs "for the small fly", and seventeen feet for salmon. Deal, ash or willow were used for butts, and hickory or hazel for tops, with the by now standard whalebone extension. "Bambou cane" was just coming into use for the construction of top sections, chiefly of salmon rods. An experienced angler might reckon to throw twelve yards of line with one hand, and seventeen with both, using a sixteen foot rod. Whether anyone would have wanted to cast single-handed with a sixteen foot six rod is another question.[/#008000][/size][/font]
[font "Poor Richard"][size 3][#008000]Traders were in business making tackle as early as 1600. Gervaise Markham suggested to his readers that they buy their rods in haberdashers' stores, where there was a 'great choice'. By the eighteenth century, the tackle trade was well established and selling every conceivable article a fisherman might need, as well as many that they didn't. A multitude of dealers sprang up during and after Walton's time, including the great firm Ustonson, which began trading in the 1760s and which was to supply tackle to King George IV.[/#008000][/size][/font]
[font "Poor Richard"][size 3][#008000]Making rods was one thing, but it wasn't long before the commercial possibilities of reels were recognised. Kirby was advertising "the best sort of Winches" in local papers by 1726 and brass winches of various designs were being advertised for sale throughout the latter half of the eighteenth century. It was during this second quarter of the eighteenth century that fishing became popular with merchants and shop keepers, which accounts for why the tackle trade expanded so greatly at the time. In the last half of the century, there came an awful development - the multiplying reel. The appearance of the multiplier so early in the history of the fly reel is unfortunate, because it sentenced anglers to a century of misery. The multiplier probably arrived on the market about 1750 or so, and was a natural response to the poor design of single action reels of the day. These tended to be wide, with small diameters, and very narrow spindles that made retrieving a fish very tricky if it ran out more than a few yards of line. The multiplier gave the angler a much higher rate of retrieve, but most designs had brass gears, which ground to pieces if they were put under any kind of strain. The illustration shows a clamp foot multiplier - click on it for a better view.[/#008000][/size][/font]
[font "Poor Richard"][size 3][#008000]From the days of the Treatyse, anglers had had to twist their own fly lines, generally out of horsehair, but the industrial revolution changed all that. The new ease with which machines could be invented and produced had its first consequences for fly fishing: a variety of tapered manufactured lines became available.[/#008000][/size][/font]
[font "Poor Richard"][size 3][#008000] The new lines were tapered, and could be cast with greater accuracy than hand-woven horsehair. The mid-eighteenth century marked the beginning of the end of the use of level lines which incorporated both the running line and the fly line. By 1850, tapered reel lines were pretty much standard issue and it was quite routine for fishermen to reverse a fly line when one end had worn. However, the rapid advances in line manufacture brought a new set of problems in their wake. By the late eighteenth century lines woven from silk and horsehair had appeared, and by the early nineteenth twisted and plaited silk lines had come on the market. Horsehair lines had many diSadvantages: they were very light, couldn't be 'shot' easily and had awful memory, particularly when newly-wound off one of the narrow spindled reels in use at the time. On the other hand, silk lines absorbed water very quickly, wore out quickly, and became too heavy to cast with; a problem which would not be resolved until finely-plaited dressed silk lines became widely available in the 1890s. Mixed silk and hair lines were an unhappy compromise, the two materials having quite different properties, but nonetheless they were widely used. They were expensive, wore out quickly, lacked strength, kinked easily, and owing to the protrusion of numberless points of hair ran very badly through the rod rings.[/#008000][/size][/font]
[font "Poor Richard"][size 3][#008000]By the end of the century, many fishermen were buying their flies from tackle dealers, rather than tying their own. If considerable advances in rods, reels and lines, had occurred, trout and salmon flies saw very little change in the eighteenth century. In 1790, a fisherman could turn up with Cotton's selection in his fly box and few would have remarked upon it; forty years later he would have been laughed at. It was the calm before the storm.[/#008000][/size][/font]
[signature]
Reply
#6
Very interesting Dryrod. Nice read, but the Calamity Jane story was much more colorful. If Dave can come up with a story like that, makes you wonder how big those fish he catches really are. Hmmmmmmmm? [Tongue]
[signature]
Reply
#7
[center][cool][font "Poor Richard"][green][size 3]Good point there rp69 - he seems to have a knack for the tall tales. Sorry about that DTC.[/size][/green][/font]
[Image: gforum.cgi?do=post_attachment;postatt_id=18038;][/center]
[signature]
Reply
#8
to know how big them fish realy are, you have to take in to concideration that I am aware of my pre-repitation for the telling of tall tales. [cool]

the formula goes like this, [Tongue]

I take my fish stories and cut the sizes in half before the telling of them, this way there isnt much of a chance for a little over exageration...[sly]
[signature]
Reply
#9
Good idea. That is about the way I do it too. [sly]
[signature]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)