Hey Guys,<br>Went down to my marina and found a nice hole(2"x5") behind the rub rail in the front.I wish these "CAPTINS"WOULD TAKE DOCKING LESONS!!<br>I can't get behind it,so the repair would be from the outside only,it's between the hull and inerliner so there is space in back of it!Also I don't mind if the repair is visable because i'm putting on a new wider rub rail around the whole boat.<br>So anybody know of good products to use for this.<br>TIGHT LINES,TIM<br><br>
Tim<br><br>How's the repair job going? <br><br>Burnin Thumbs!<br><br>Steve B <br>Moderator Lures/Baits Forum<br><A HREF="http://www.demonjigs.com" target="_new">http://www.demonjigs.com</A>
Hey Steve,<br>I'm giving it a shot this weekend,Still trying to figure out the best way to do it.<br>The good news is the "CAPTAIN" left word with the marina that he'll pay,as long as they keep him anonyous.<br>I'll let you know it goes,thanks<br>TIGHT LINES,TIM <br><br><br><br>
No worries Tim<br><br>Well, at least the person was able to to put their hand up and say hey, that was me and I'll fix it by paying for the repair. <br><br>I have not had much to do with (glass) boat repairs so I cannot comment much on the best way to go about it. Others here might, although you may have it sussed (worked out) by now too. <br><br>Either way, and from what you descibe, it sounds tricky because of it's location and being difficult to get at. <br><br>Have you checked out any of the local repairer's at the marina for ideas?<br><br>Burnin Thumbs!<br><br>Steve B <br>Moderator Lures/Baits Forum<br><A HREF="http://www.demonjigs.com" target="_new">http://www.demonjigs.com</A>
Hey Steve,<br>I got a few ways to do it,each one the person says was the right! I'll give one a try this saturday,don't know which but I'll try :-) <br>The guy did come over and said he's sorry,I taught him docking last spring!! So much for my teaching abilities TIGHT LINES,TIM<br><br>
