07-27-2014, 09:35 PM
[#005000]
Along those lines - if you have a BFT sticker on your bumper board (as you do), slap another sticker with your handle and the year, and we'll call it good. I figure - once we've seen your measuring setup enough, shouldn't cause any heartache. Long as you've got a calibrated rules, and not a "fisherman's" ruler [blush][/#005000][/quote]
OK Yote, I can do that. The Ruler I attached to the Bump board is a metal yard stick from a Machine Tool Company that I had attached to the side of my boat live well. But couldn't really see it there. The long marks on the board are permanent Sharpie marker, and extended straight down from the yard stick marks with a roofer square for a straight edge. If there is any deviation on that board, you would have to measure it with a close tolerance caliper.
[signature]
Along those lines - if you have a BFT sticker on your bumper board (as you do), slap another sticker with your handle and the year, and we'll call it good. I figure - once we've seen your measuring setup enough, shouldn't cause any heartache. Long as you've got a calibrated rules, and not a "fisherman's" ruler [blush][/#005000][/quote]
OK Yote, I can do that. The Ruler I attached to the Bump board is a metal yard stick from a Machine Tool Company that I had attached to the side of my boat live well. But couldn't really see it there. The long marks on the board are permanent Sharpie marker, and extended straight down from the yard stick marks with a roofer square for a straight edge. If there is any deviation on that board, you would have to measure it with a close tolerance caliper.
[signature]
"OCD = Obsessive Catfish Disorder "
Or so it says on my license plate holder
Or so it says on my license plate holder