Posts: 1,614
Threads: 0
Joined: Jun 2003
Reputation:
0
I'm curious what type of line and what lb. test people like for ice fishing for macks. I use 14lb. fireline in open water but I'm wondering whether it will soak up water, freeze and get stiff at temperatures below freezing. Am I better off to just go with 8 or 10 lb. mono and fight the big fish carefully (assuming I'm lucky enough to hook one)? I would appreciate your collective wisdom on this one. Thanks.
[signature]
Posts: 1,791
Threads: 0
Joined: Feb 2003
Reputation:
0
This 9 lb mack was caught on 20 lb fire wire with 15 lb florocarbon leader, through the ice yesterday.
[signature]
Posts: 705
Threads: 0
Joined: Dec 2002
Reputation:
0
Is Fireline visible to fish? If you added leader, wouldn't that make the tensile strength less? Should you add leader? Do I ask too many questions?[crazy]
[signature]
Posts: 2,770
Threads: 0
Joined: Jan 2003
Reputation:
0
if you say use 30# fireline ( which i think is more visable in water )and add a lighter leader say 20 flouro you will of course need to set your drag for the lighter line also i prefer no swivel which takes two knots i like to tie my leader together using a blood knot
do i try and anwser to many questions?[crazy]
sorry neal couldn't reseist
[signature]
Posts: 582
Threads: 0
Joined: Aug 2002
Reputation:
0
Your weekest line in the chain is the limiting factor as far as strength. Fireline with a fluorocrabon leader is great for ice fishing for Lakers. It doesn't absorb water much compared to the woven lines (e.g. Spider Wire) so it doesn't freeze up, become stiff, or gum up in your spool as much. There's virtually no stretch like mono and fluorocarbon. That gives you the ability to feel every nibble and give a great hook set when it's time. Also, it will not be cut if it rubs the edge of the ice hole during the fight.
[signature]
Posts: 1,791
Threads: 0
Joined: Feb 2003
Reputation:
0
BLM taught me a huge thing yesterday about fishing for bigger fish. Find out the size limit of the hole you can have on the body of water you are fishing and utilize that, definitely with a power auger.(like bear lake is 18 inches) Cutting 3 holes to make one big hole, definitely makes it nicer to manuever a bigger fish.
[signature]
Posts: 733
Threads: 0
Joined: Feb 2003
Reputation:
0
I agree with Polokid. Your arm gets mighty cold trying to drag a 34" laker through an 8" hole. It was done, but my buddy went well past the neoprene gloves he was wearing to get ahold of the fish.
As far as line goes, I've usually just stuck with mono 10-14lb. I have missed a lot of strikes too. This year, if I can get up to the Gorge, I am going to use 24/12 Fireline and flourocarbon leader, probably 12 or 14lb. I like either the surgeons knot or the blood knot for joining two different size or type lines. Either one retains 95+% of the line strength and either of these will slide right through eyelets.
If you have a metal spool on your ice fishing rig, you might want to put 20-30yds. mono backing on the spool before the Fireline. I have had Fireline slip on a cold metal spool on spinning reels. Makes setting the hook or trying to reel in the fish a real pain. If you are using a levelwind, you most likely would not have this problem, but might want to put a little mono on just to be safe.
[signature]
Posts: 15,495
Threads: 1,314
Joined: Feb 2002
Reputation:
12
Good looking mack Polokid! It must have been a thrill to pull that through the ice.
[signature]
Posts: 15,495
Threads: 1,314
Joined: Feb 2002
Reputation:
12
I prefer to use a quality swivel -- rather than merely using a blood knot. Jigging for macks through the ice or otherwise is done with larger jigs than one uses for typical ice fishing. I have watched these jigs through an AquaVu camera and they invariably always turn the same direction every time they are jigged. After awhile, it is easy for your line to become twisted if a swivel is not used.
[signature]