04-12-2007, 08:29 PM
Because I ama screen printer, I use Corel Draw 9. It is a very cheap, ebay for around $15. It is the primary program for T-shirt printers. But ANY DRAWING program WILL WORK. Most PC's come with Microsoft Paint. Although not as indepth as Corel Draw 9, it is more than capable of handleing a simple schematic.
What kind of boat do you float? If I had something to look at, I could probably get something together from that.
If you do it yourself use 1/4 scale. That way when you print it out to study to sketch on it, the image will be large enough to visualize the addons. I also colorized some parts of the schematic so I can get a feeling of depth.
If ya need help just yell
Kaualt
Floatin in the Burgh
[signature]
What kind of boat do you float? If I had something to look at, I could probably get something together from that.
If you do it yourself use 1/4 scale. That way when you print it out to study to sketch on it, the image will be large enough to visualize the addons. I also colorized some parts of the schematic so I can get a feeling of depth.
If ya need help just yell
Kaualt
Floatin in the Burgh
[signature]