04-27-2009, 11:55 AM
[cool][#0000ff]I no longer use protective aprons...inside or outside. The modern tubes, like my SFC, have much of the front end covered in tough PVC coating. And, with the rigid aprons I use, there is very little exposed surface.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]However, in the olden days, when I used round tubes, I almost always used either an apron draped over the front or tucked inside, between the cover and air chamber. And it helped reduce the number or spine holes I got in my tubes.[/#0000ff]
[signature]
[#0000ff][/#0000ff]
[#0000ff]However, in the olden days, when I used round tubes, I almost always used either an apron draped over the front or tucked inside, between the cover and air chamber. And it helped reduce the number or spine holes I got in my tubes.[/#0000ff]
[signature]