05-21-2013, 08:31 PM
Ok since I got my new 8 wt fly rod I found that the handle was just a little too big for the current rod holders I had made. So back to the work bench. I came up with a great design that still will be tweaked. Best thing is that it is not permanant (not glued) so I can move it around as needed. I went with a piece of ABS for the tube and PVC for the joints. I also used a 
dle clamp to attach it to my current workings. The next area of making it better is I am thinking of replacing the T joint with a an elbow if I can find one that would fit. Heres the pics! Now its time to go try it out. Time to FISH!!![cool]
[inline "DSCN1799 - 400.jpg"]
[inline "DSCN1797 - 400.jpg"]
[inline "DSCN1798 - 400.jpg"]
[signature]
dle clamp to attach it to my current workings. The next area of making it better is I am thinking of replacing the T joint with a an elbow if I can find one that would fit. Heres the pics! Now its time to go try it out. Time to FISH!!![cool][inline "DSCN1799 - 400.jpg"]
[inline "DSCN1797 - 400.jpg"]
[inline "DSCN1798 - 400.jpg"]
[signature]