Posts: 1,794
Threads: 0
Joined: Jan 2009
Reputation:
0
I just looking for a way to make it usesable.
[signature]
Posts: 19,236
Threads: 2
Joined: Nov 2005
Reputation:
1
HUH? It is useable...that is why he sells them.
[signature]
Posts: 98
Threads: 0
Joined: Jun 2009
Reputation:
0
I haven't looked at mine lately but is it possible to mount the rear deck a few inches further back so once you get to the water you could unclip it and reach between the frame and the deck to lift it out of there. You could also put it back on as long as the boat is in the water. You might need to mount a couple spacers to keep it back.
Another thought (and again I don't have mine assembled to try it): Does it do any good to drill a second set of holes further down so you could at least lift it up higher once you've got it to the water. I know you had problems with weeds, but if it's higher that would be less of a problem. Also, once summer is over and the weeds are gone, you can just leave it in place to act as a keel, even when you have the motor mounted.
A more drastic solution might be to mount a wheel holder tube that both pivots and locks rather than the current fixed tube. That would allow you to pivot it up sideways when you don't need it (if it doesn't hit the pontoon) and rotate it back down when you do. If it can be rotated enought to clear the water you would be good. Would probably take some welding and or metal fabrication skills.
Jim
[signature]
Posts: 1,794
Threads: 0
Joined: Jan 2009
Reputation:
0
[quote flygoddess]HUH? It is useable...that is why he sells them.[/quote]
yeah............
[signature]
Posts: 817
Threads: 0
Joined: Mar 2007
Reputation:
0
When I started out wrenching a million years ago it seems. I was with a field tech on a drill rig in Wyoming. I think I was 23 or 24 at the time. We were taking off a pump. My wrench slipped, I smashed my hand and let loose with some choice expletives and started hitting the pump with my wrench. Carl (my mentor) looked at me and asked me what the hell I was doing. "Haven't you figured out by now, who's got the brains and what is just a piece of machinery?
God gave you the brains so use them. The pump is only a piece of iron. Never let an inanimate object kick your ass."
31 years later, I've never forgotten what he said to me.
And I've never had an inanimate object kick my ass again.
[signature]
Posts: 1,794
Threads: 0
Joined: Jan 2009
Reputation:
0
Jim_T wrote:[/quote]
I haven't looked at mine lately but is it possible to mount the rear deck a few inches further back so once you get to the water you could unclip it and reach between the frame and the deck to lift it out of there. You could also put it back on as long as the boat is in the water. You might need to mount a couple spacers to keep it back.
Another thought (and again I don't have mine assembled to try it): Does it do any good to drill a second set of holes further down so you could at least lift it up higher once you've got it to the water. I know you had problems with weeds, but if it's higher that would be less of a problem. Also, once summer is over and the weeds are gone, you can just leave it in place to act as a keel, even when you have the motor mounted.
A more drastic solution might be to mount a wheel holder tube that both pivots and locks rather than the current fixed tube. That would allow you to pivot it up sideways when you don't need it (if it doesn't hit the pontoon) and rotate it back down when you do. If it can be rotated enought to clear the water you would be good. Would probably take some welding and or metal fabrication skills.
Jim[/quote]
Those are some good ideas Jim. Thank you.
I was thinking to make a extender (welding and such)
that would move the wheel tube about 12'' further back.
That sure would make it a lot easier to install it.
Its not that bad to put it on when on dry land but in the
water its very hard without getting water down my
waders ( waders rolled down my waist).
Anyways, I will keep working on it.
Peter
[signature]
Posts: 1,794
Threads: 0
Joined: Jan 2009
Reputation:
0
[quote mojorizing]When I started out wrenching a million years ago it seems. I was with a field tech on a drill rig in Wyoming. I think I was 23 or 24 at the time. We were taking off a pump. My wrench slipped, I smashed my hand and let loose with some choice expletives and started hitting the pump with my wrench. Carl (my mentor) looked at me and asked me what the hell I was doing. "Haven't you figured out by now, who's got the brains and what is just a piece of machinery?
God gave you the brains so use them. The pump is only a piece of iron. Never let an inanimate object kick your ass."
31 years later, I've never forgotten what he said to me.
And I've never had an inanimate object kick my ass again.[/quote]
Thank you for those words big guy !!!!!!!! I will always
remember what you just sayd. And not just for the
wheel but for everything. Really !
Peter
[signature]
]
][laugh][laugh]