06-11-2014, 09:00 PM
I finally figured out how to fix a Silent Drag! You'll need
#1 glue "The Amazing Goop"
#2 a "Feeler Gauge"
#3 a pair of "Metal Sheers"
This is how to replace a broken metal clicker which normally clicks against the drag wheel inside a spinning reel,or any reel with an internal drag such as a bait runner for example.
Carefully cut out a metal strip to the proper length,line it up with the drag clicker wheel until it looks right then glue it in.
In the video I bent the metal strip at a 90 degree and glued the bent part against the back of the spool so it holds better,but you don't have to..It can just be straight .
Watch the video for better instructions and a detailed guide
[#0000FF]Video Link [/#0000FF]http://youtu.be/n-aVWa-G2Sg
[url "https://www.youtube.com/watch?v=n-aVWa-G2Sg"] [/url]
[url "https://www.youtube.com/watch?v=n-aVWa-G2Sg"]How to Fix a Silent Drag + Broken Bail Spring Hack (Spinning Reel Repair)[/url]
[inline "silent (3).JPG"][inline "silent (4).JPG"][inline "silent (2).JPG"][inline "metal sheers.JPG"][inline "feeler gauge.JPG"]
[signature]
#1 glue "The Amazing Goop"
#2 a "Feeler Gauge"
#3 a pair of "Metal Sheers"
This is how to replace a broken metal clicker which normally clicks against the drag wheel inside a spinning reel,or any reel with an internal drag such as a bait runner for example.
Carefully cut out a metal strip to the proper length,line it up with the drag clicker wheel until it looks right then glue it in.
In the video I bent the metal strip at a 90 degree and glued the bent part against the back of the spool so it holds better,but you don't have to..It can just be straight .
Watch the video for better instructions and a detailed guide
[#0000FF]Video Link [/#0000FF]http://youtu.be/n-aVWa-G2Sg
[url "https://www.youtube.com/watch?v=n-aVWa-G2Sg"] [/url]
[url "https://www.youtube.com/watch?v=n-aVWa-G2Sg"]How to Fix a Silent Drag + Broken Bail Spring Hack (Spinning Reel Repair)[/url]
[inline "silent (3).JPG"][inline "silent (4).JPG"][inline "silent (2).JPG"][inline "metal sheers.JPG"][inline "feeler gauge.JPG"]
[signature]